# This file managed by Chef. Do not edit directly. 
# copied from https://github.com/awslabs/amazon-kinesis-producer/blob/master/java/amazon-kinesis-producer-sample/default_config.properties

# You can load a properties file with
# KinesisProducerConfiguration.fromPropertiesFile(String)
#
# Any fields not found in the properties file will take on default values.
#
# The values loaded are checked against any constraints that each respective
# field may have. If there are invalid values an IllegalArgumentException will
# be thrown.


# Enable aggregation. With aggregation, multiple user records are packed into
# a single KinesisRecord. If disabled, each user record is sent in its own
# KinesisRecord.
#
# If your records are small, enabling aggregation will allow you to put many
# more records than you would otherwise be able to for a shard before getting
# throttled.
#
# Default: true
AggregationEnabled = <%= node['maxwell']['kpl']['AggregationEnabled'] %>

# Maximum number of items to pack into an aggregated record.
#
# There should be normally no need to adjust this. If you want to limit the
# time records spend buffering, look into record_max_buffered_time instead.
#
# Default: 4294967295
# Minimum: 1
# Maximum (inclusive): 9223372036854775807
AggregationMaxCount = <%= node['maxwell']['kpl']['AggregationMaxCount'] %>

# Maximum number of bytes to pack into an aggregated Kinesis record.
#
# There should be normally no need to adjust this. If you want to limit the
# time records spend buffering, look into record_max_buffered_time instead.
#
# If a record has more data by itself than this limit, it will bypass the
# aggregator. Note the backend enforces a limit of 50KB on record size. If
# you set this beyond 50KB, oversize records will be rejected at the backend.
#
# Default: 51200
# Minimum: 64
# Maximum (inclusive): 1048576
AggregationMaxSize = <%= node['maxwell']['kpl']['AggregationMaxSize'] %>

# Maximum number of items to pack into an PutRecords request.
#
# There should be normally no need to adjust this. If you want to limit the
# time records spend buffering, look into record_max_buffered_time instead.
#
# Default: 500
# Minimum: 1
# Maximum (inclusive): 500
CollectionMaxCount = <%= node['maxwell']['kpl']['CollectionMaxCount'] %>

# Maximum amount of data to send with a PutRecords request.
#
# There should be normally no need to adjust this. If you want to limit the
# time records spend buffering, look into record_max_buffered_time instead.
#
# Records larger than the limit will still be sent, but will not be grouped
# with others.
#
# Default: 5242880
# Minimum: 52224
# Maximum (inclusive): 9223372036854775807
CollectionMaxSize = <%= node['maxwell']['kpl']['CollectionMaxSize'] %>

# Timeout (milliseconds) for establishing TLS connections.
#
# Default: 6000
# Minimum: 100
# Maximum (inclusive): 300000
ConnectTimeout = <%= node['maxwell']['kpl']['ConnectTimeout'] %>

# Use a custom Kinesis and CloudWatch endpoint.
#
# Mostly for testing use. Note this does not accept protocols or paths, only
# host names or ip addresses. There is no way to disable TLS. The KPL always
# connects with TLS.
#
# Expected pattern: ^([A-Za-z0-9-\\.]+)?$
<% if !node['maxwell']['kpl']['CustomEndpoint'].empty? %>
CustomEndpoint = <%= node['maxwell']['kpl']['CustomEndpoint'] %>
<% end %>

# If true, throttled puts are not retried. The records that got throttled
# will be failed immediately upon receiving the throttling error. This is
# useful if you want to react immediately to any throttling without waiting
# for the KPL to retry. For example, you can use a different hash key to send
# the throttled record to a backup shard.
#
# If false, the KPL will automatically retry throttled puts. The KPL performs
# backoff for shards that it has received throttling errors from, and will
# avoid flooding them with retries. Note that records may fail from
# expiration (see record_ttl) if they get delayed for too long because of
# throttling.
#
# Default: false
FailIfThrottled = <%= node['maxwell']['kpl']['FailIfThrottled'] %>

# Minimum level of logs. Messages below the specified level will not be
# logged. Logs for the native KPL daemon show up on stderr.
#
# Default: info
# Expected pattern: info|warning|error
LogLevel = <%= node['maxwell']['kpl']['LogLevel'] %>

# Maximum number of connections to open to the backend. HTTP requests are
# sent in parallel over multiple connections.
#
# Setting this too high may impact latency and consume additional resources
# without increasing throughput.
#
# Default: 24
# Minimum: 1
# Maximum (inclusive): 256
MaxConnections = <%= node['maxwell']['kpl']['MaxConnections'] %>

# Controls the granularity of metrics that are uploaded to CloudWatch.
# Greater granularity produces more metrics.
#
# When "shard" is selected, metrics are emitted with the stream name and
# shard id as dimensions. On top of this, the same metric is also emitted
# with only the stream name dimension, and lastly, without the stream name.
# This means for a particular metric, 2 streams with 2 shards (each) will
# produce 7 CloudWatch metrics, one for each shard, one for each stream, and
# one overall, all describing the same statistics, but at different levels of
# granularity.
#
# When "stream" is selected, per shard metrics are not uploaded; when
# "global" is selected, only the total aggregate for all streams and all
# shards are uploaded.
#
# Consider reducing the granularity if you're not interested in shard-level
# metrics, or if you have a large number of shards.
#
# If you only have 1 stream, select "global"; the global data will be
# equivalent to that for the stream.
#
# Refer to the metrics documentation for details about each metric.
#
# Default: shard
# Expected pattern: global|stream|shard
MetricsGranularity = <%= node['maxwell']['kpl']['MetricsGranularity'] %>

# Controls the number of metrics that are uploaded to CloudWatch.
#
# "none" disables all metrics.
#
# "summary" enables the following metrics: UserRecordsPut, KinesisRecordsPut,
# ErrorsByCode, AllErrors, BufferingTime.
#
# "detailed" enables all remaining metrics.
#
# Refer to the metrics documentation for details about each metric.
#
# Default: detailed
# Expected pattern: none|summary|detailed
MetricsLevel = <%= node['maxwell']['kpl']['MetricsLevel'] %>

# The namespace to upload metrics under.
#
# If you have multiple applications running the KPL under the same AWS
# account, you should use a different namespace for each application.
#
# If you are also using the KCL, you may wish to use the application name you
# have configured for the KCL as the the namespace here. This way both your
# KPL and KCL metrics show up under the same namespace.
#
# Default: KinesisProducerLibrary
# Expected pattern: (?!AWS/).{1,255}
MetricsNamespace = <%= node['maxwell']['kpl']['MetricsNamespace'] %>

# Delay (in milliseconds) between each metrics upload.
#
# For testing only. There is no benefit in setting this lower or higher in
# production.
#
# Default: 60000
# Minimum: 1
# Maximum (inclusive): 60000
MetricsUploadDelay = <%= node['maxwell']['kpl']['MetricsUploadDelay'] %>

# Minimum number of connections to keep open to the backend.
#
# There should be no need to increase this in general.
#
# Default: 1
# Minimum: 1
# Maximum (inclusive): 16
MinConnections = <%= node['maxwell']['kpl']['MinConnections'] %>

# Server port to connect to. Only useful with custom_endpoint.
#
# Default: 443
# Minimum: 1
# Maximum (inclusive): 65535
Port = <%= node['maxwell']['kpl']['Port'] %>

# Limits the maximum allowed put rate for a shard, as a percentage of the
# backend limits.
#
# The rate limit prevents the producer from sending data too fast to a shard.
# Such a limit is useful for reducing bandwidth and CPU cycle wastage from
# sending requests that we know are going to fail from throttling.
#
# Kinesis enforces limits on both the number of records and number of bytes
# per second. This setting applies to both.
#
# The default value of 150% is chosen to allow a single producer instance to
# completely saturate the allowance for a shard. This is an aggressive
# setting. If you prefer to reduce throttling errors rather than completely
# saturate the shard, consider reducing this setting.
#
# Default: 150
# Minimum: 1
# Maximum (inclusive): 9223372036854775807
RateLimit = <%= node['maxwell']['kpl']['RateLimit'] %>

# Maximum amount of itme (milliseconds) a record may spend being buffered
# before it gets sent. Records may be sent sooner than this depending on the
# other buffering limits.
#
# This setting provides coarse ordering among records - any two records will
# be reordered by no more than twice this amount (assuming no failures and
# retries and equal network latency).
#
# The library makes a best effort to enforce this time, but cannot guarantee
# that it will be precisely met. In general, if the CPU is not overloaded,
# the library will meet this deadline to within 10ms.
#
# Failures and retries can additionally increase the amount of time records
# spend in the KPL. If your application cannot tolerate late records, use the
# record_ttl setting to drop records that do not get transmitted in time.
#
# Setting this too low can negatively impact throughput.
#
# Default: 100
# Maximum (inclusive): 9223372036854775807
RecordMaxBufferedTime = <%= node['maxwell']['kpl']['RecordMaxBufferedTime'] %>

# Set a time-to-live on records (milliseconds). Records that do not get
# successfully put within the limit are failed.
#
# This setting is useful if your application cannot or does not wish to
# tolerate late records. Records will still incur network latency after they
# leave the KPL, so take that into consideration when choosing a value for
# this setting.
#
# If you do not wish to lose records and prefer to retry indefinitely, set
# record_ttl to a large value like INT_MAX. This has the potential to cause
# head-of-line blocking if network issues or throttling occur. You can
# respond to such situations by using the metrics reporting functions of the
# KPL. You may also set fail_if_throttled to true to prevent automatic
# retries in case of throttling.
#
# Default: 30000
# Minimum: 100
# Maximum (inclusive): 9223372036854775807
RecordTtl = <%= node['maxwell']['kpl']['RecordTtl'] %>

# Which region to send records to.
#
# If you do not specify the region and are running in EC2, the library will
# use the region the instance is in.
#
# The region is also used to sign requests.
#
# Expected pattern: ^([a-z]+-[a-z]+-[0-9])?$
Region = <%= node['maxwell']['kpl']['Region'] %>

# The maximum total time (milliseconds) elapsed between when we begin a HTTP
# request and receiving all of the response. If it goes over, the request
# will be timed-out.
#
# Note that a timed-out request may actually succeed at the backend. Retrying
# then leads to duplicates. Setting the timeout too low will therefore
# increase the probability of duplicates.
#
# Default: 6000
# Minimum: 100
# Maximum (inclusive): 600000
RequestTimeout = <%= node['maxwell']['kpl']['RequestTimeout'] %>

# Verify the endpoint's certificate. Do not disable unless using
# custom_endpoint for testing. Never disable this in production.
#
# Default: true
VerifyCertificate = <%= node['maxwell']['kpl']['VerifyCertificate'] %>